 |
Perolo API Valve for Fuel Tanker
| Quantity: | |
|---|---|
GY672C
Perolo
Panel/Dash Mounted Air Control Valve - PTO Switch
Panel/dash mounted manually operated 4/2 directional control switch for the operation of single and double acting cylinders. These valves have 6mm push-in fitting ports and come as standard with a pneumatic reset and control knob indicator.
This manual air release valve requires the reset signal to be removed/disengaged from the reset port before the valve may be operated and are ideal for interlocking with hand-brake air systems for additional safety. The valve may also be used as a 4/2 valve when no reset signal is required.
Design
A spool type 4/2 hand-operated pneumatic switch, with a visual mechanical indicator that the switch has been operated. An air signal to the reset port prevents the switch from being actuated, until the reset port is vented. Ideally suited for connection to an air hand-brake relay to prevent the switch from being operated if the hand-brake is released.Port Sizes: 6mm PIFPressure: 3.0 - 13bar
Features
Compact
Non-corrosive
Indicator Band
Push-in Fittings
Ergonomic Actuator
Safety Interlock Port
6mm Tubing Version
Applications
1. PTO Actuation (Power Take Off)
2. Bottom Loading Tanker Controls
3. Construction Equipment
4. Lift Gates
5. Specialty Truck Equipment
6. Cement Mixers
7. Fire Trucks
8. Emergency Shut Down Systems
9. Pneumatic Control Panels
10. Air Compressor Controls
11. Test Panels / Benches
12. Agricultural Equipmen
Panel/Dash Mounted Air Control Valve - PTO Switch
Panel/dash mounted manually operated 4/2 directional control switch for the operation of single and double acting cylinders. These valves have 6mm push-in fitting ports and come as standard with a pneumatic reset and control knob indicator.
This manual air release valve requires the reset signal to be removed/disengaged from the reset port before the valve may be operated and are ideal for interlocking with hand-brake air systems for additional safety. The valve may also be used as a 4/2 valve when no reset signal is required.
Design
A spool type 4/2 hand-operated pneumatic switch, with a visual mechanical indicator that the switch has been operated. An air signal to the reset port prevents the switch from being actuated, until the reset port is vented. Ideally suited for connection to an air hand-brake relay to prevent the switch from being operated if the hand-brake is released.Port Sizes: 6mm PIFPressure: 3.0 - 13bar
Features
Compact
Non-corrosive
Indicator Band
Push-in Fittings
Ergonomic Actuator
Safety Interlock Port
6mm Tubing Version
Applications
1. PTO Actuation (Power Take Off)
2. Bottom Loading Tanker Controls
3. Construction Equipment
4. Lift Gates
5. Specialty Truck Equipment
6. Cement Mixers
7. Fire Trucks
8. Emergency Shut Down Systems
9. Pneumatic Control Panels
10. Air Compressor Controls
11. Test Panels / Benches
12. Agricultural Equipmen
