 |
| Quantity: | |
|---|---|
B1
DESEINOR
1.Working conditions:
The oil pump has been tested and passed through a strict performance test for temperature resistance and anti-shock with a high quality protection rating of IP55. It diesel or kerosene fuel. This pump is designed for all kings of machinery, tractor and farm equipment.
Voltage | Power | Suction Distance | Head | Flow Rate | Dimension |
110V/230V/240V | 375W | 2M | 10M | 60L / min | 1" |
2. Structural characteristics:
Pump casing: Cast Iron & Stainess Steel
Impeller: Cast Iron/Brass
Diffuser: Cast iron
Motor Housing: Steel
Pump-motor adaptor:Aluminum/Cast iron
Mechanical seal: Stainless steel(graphite to ceramic)
Shaft: 45# steel or stainless steel
Bearing: SKF/NTN/NSK/China
Insulation class: B and F
Protection class: IP55
3.Technical data(230V,50HZ)
1. The power source voltage should be confirmed to match the power input of the pump prior to connecting to the pump.
2. Voltage tolerance of +/-5% .
3. Oil transfer is in the direction of the arrow as indicated on the pump.
4. Be sure to have an air-tight seal on the end of the suction hose to prevent debris from damaging the pump.
5. The duty cycle of this pump is 30 minutes under normal usage. The pump has thermal protection and may shut off if the maximum operating temperature of the pump is achieved.
1.Working conditions:
The oil pump has been tested and passed through a strict performance test for temperature resistance and anti-shock with a high quality protection rating of IP55. It diesel or kerosene fuel. This pump is designed for all kings of machinery, tractor and farm equipment.
Voltage | Power | Suction Distance | Head | Flow Rate | Dimension |
110V/230V/240V | 375W | 2M | 10M | 60L / min | 1" |
2. Structural characteristics:
Pump casing: Cast Iron & Stainess Steel
Impeller: Cast Iron/Brass
Diffuser: Cast iron
Motor Housing: Steel
Pump-motor adaptor:Aluminum/Cast iron
Mechanical seal: Stainless steel(graphite to ceramic)
Shaft: 45# steel or stainless steel
Bearing: SKF/NTN/NSK/China
Insulation class: B and F
Protection class: IP55
3.Technical data(230V,50HZ)
1. The power source voltage should be confirmed to match the power input of the pump prior to connecting to the pump.
2. Voltage tolerance of +/-5% .
3. Oil transfer is in the direction of the arrow as indicated on the pump.
4. Be sure to have an air-tight seal on the end of the suction hose to prevent debris from damaging the pump.
5. The duty cycle of this pump is 30 minutes under normal usage. The pump has thermal protection and may shut off if the maximum operating temperature of the pump is achieved.
